Filter
Top Products
1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2-232
© 2000, ADC Telecommunications, Inc.
DLP-750
Page 1 of 2
SET SHELF HOUSEKEEPING ALARM CONFIGURATION
Summary: This procedure details the steps required to configure the housekeeping alarm
messages that will be displayed when an input is triggered via an external source.
1. From the shelf level GUI Chassis View window, select the Fault pull down menu using the
mouse to click on it, or by entering “Alt+A” on the keyboard. Refer to Figure 750-1.
2. Select the Configure Housekeeping Alarms option using the down arrow keys to highlight
it and hitting “Enter” or “Return”, or by entering an “Alt+A” on the keyboard.
3. The Housekeeping Alarms shelf level GUI display appears as shown in Figure 750-2. The
State column indicates the current state of that alarm input. A green square indicates no
alarm is present, while the Red square indicates an alarm condition is active on that input.
4. Enter in an alarm description for each of the eight alarm interfaces according to the type of
equipment hardwired to the SC EIM card. Refer to the label located inside the front door
panel if necessary. This label should have been filled out by the installer during installation.
Refer to List of related Publications in the preface of this manual for installation procedures.
5. Select the Apply button at the bottom of the window to send the new configuration data to
the database.
6. Select the Close button at the bottom of the window to return to the shelf level GUI Chassis
View screen.
Stop! You have completed this procedure.
Cellworx Vision: Chassis View, Network Element 2
File Configuration Fault Security
S
C
N
M
I
C
S
C
6
2
2
R
i
n
6
2
2
R
i
n
X
T
3
T
M
U
X
T
M
U
X
E
X
T
1
M
u
l
t
i
T
3
C
R
S
T
3
C
R
S
RE
1
M
u
l
t
i
RRE
1
M
u
l
t
i
SELECT THE FAULT PULLDOWN
MENU USING LEFT MOUSE
BUTTON OR BY PRESSING THE
ALT+A KEYS SIMULTANEOUSLY.
13473-C
Configure Housekeeping Alarms
Execute Alarm Cut-Off
Figure 750-1. Shelf Level GUI Fault Pull Down Menu