Filter
Top Products
1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2-189
2000, ADC Telecommunications, Inc.
DLP-737
Page 6 of 8
Cellworx Vision : Add Ring NE - Connect Fiber
X
Cancel
Next>>
Connect the physical fiber to the transmit port of
the left Ring Interface Card on network element
and the receive port of the left Ring Interface Card
on the new network element.
Connect the physical fiber to the receive port of the
left Ring Interface Card on network element
and the transmit port of the left Ring Interface Card
on the new network element.
East Node (id 2)
West Node (id 1)
11725-BC
Figure 737-7. Cellworx Vision Add Ring NE Connect New NE Fibers
Waiting for new network element to boot...
Normal boot time should not exceed five minutes
Elapsed time: 9
X
Cancel
Cellworx Vision : Add Ring NE - Wait for Boot-up
11759-C
Figure 737-8. Cellworx Vision Wait For NE to Boot
Cellworx Vision: Add NE - Boot Time Exceeded
Normal boot time for the network element has
been exceeded. This could be the result of a
communication failure with the network element.
Please check all cables and the network element's
status via craft interface if necessary.
Retry
X
Quit
0026-046
Figure 737-9. Add NE Boot Time Exceeded Window