Filter
Top Products
1152700 • Issue 1 • February 2001 • Operation and Maintenance
Page 2-389
© 2000, ADC Telecommunications, Inc.
DLP-789
Page 1 of 3
RETRIEVE FE1 FRS CARD STATUS
Summary: This procedure defines the information retrieved from the shelf level GUI display for
the FE1 FRS card status. User must have the GUI launched and accessed the shelf level GUI
display per NTP-007 prior to performing this procedure.
1. Double click on the FE1 FRS card located in the shelf level GUI “Chassis View” at the top
of the window.
2. The FE1 FRS card display appears as shown in Figure 789-1. Click the small block
between the Status and Configuration sections and drag it downward to view all the status
information. Refer to Table 789-1 for definitions of status information provided.
3. Select each port on the card to view the port status.
4. Select Close button to return to the chassis level view.
Stop! You have completed this procedure.
Cellworx Vision: Card View - FE1 Frame Relay Service
Status:
Apply Chassis View
Refresh Close
X
Card Level
Operational State:
Port Level
NE Name: Cellworx1
NE Id: 21
Card: FE1 FRS
Slot Number: 13
Port Number: 1
Status
Active
APS
1
2
3
4
5
6
7
8
Port
ADC
FE1
FRS
Up
Line State:
Recieve:
No Alarm
RCV AIS
RCV Far End LOF
RCV Test Code
Transmit:
XMT AIS
XMT Far End LOF
Other:
LOF
LOS
Loopback State
Other Failure
Configuration:
Port Level
APPLIES CHANGES
AND SENDS TO SHELF
CONTROLLER.
RETURNS TO CHASSIS
VIEW WITHOUT CLOSING
CARD LEVEL VIEW.
REPAINTS WINDOW
TO REFLECT ANY
CHANGES.
CLOSES CARD LEVEL
VIEW AND RETURNS TO
SHELF LEVEL VIEW.
CLICK ON BOX AND DRAG
UP OR DOWN TO EXPAND
STATUS OR CONFIGURATION
VIEWS.
Availability State:
Protection State:
Available
Not Protected
RCV Far End LOMF
XMT Far End LOMF
0026-010
Figure 789-1. FE1 FRS Card Status Window