Filter
Top Products
Configuring Trap Receivers
96 Avidia System Configuration and Management User Manual
Displaying Trap Receivers
To verify your trap receiver configuration, from the ::trap=> prompt, type show then press
. A screen similar to the following displays.
Deleting Trap Receivers
1 From the ::trap=> prompt, type show then press to display the configured trap
receivers.
2 Note the index number of the trap receiver you want to delete.
3 Type the delete command in the following format then press .
delete <index>
Parameter
<index>
The trap receiver table index number of the trap receiver you want to delete.
Example
::trap=> delete 2
ENTER
::trap=> show
Index Network Address Subnet Mask Community Version
1 90.0.0.5 255.255.255.0 public SNMPv1
2 90.0.0.6 255.255.255.0 private SNMPv2c
ENTER
ENTER