Filter
Top Products
Chapter 24: Configuring Bridging and Routing
Avidia System Configuration and Management User Manual 501
Modifying System Bridging Parameters
In the System Bridging Configuration window:
1 Use the
WAN Broadcast box to Enable or Disable the broadcasting of unknown WAN frames
to all WAN logical interfaces.
2 Use the Bridging box to Enable or Disable bridging for the system.
3 In the
Aging Time Interval box, type the interval, in seconds, after which Bridging Table
entries are deleted if they are not relearned. The valid rate is 10 - 1000000. The default is
300 seconds.
4 Use the
Spanning Tree Protocol box to Enable or Disable STP for the system.
5 Do one of the following:
• To activate the settings and close the
System Bridging Configuration window, click Set.
• To cancel the settings and close the
System Bridging Configuration window, click Close.