Filter
Top Products
Displaying System Inventory
588 Avidia System Configuration and Management User Manual
Setting the Refresh Rate
The Web interface refresh rate determines the interval at which the data on the performance data
screens is automatically refreshed. When the management card is rebooted, this setting reverts
to the default value of five minutes.
1 In the
User Table window Refresh Time (seconds) box, type the desired refresh rate in
seconds.
The valid range is 5 to 86,400 seconds.
2 Do one of the following:
• Click
Set to save the new setting.
• Click
Get to cancel the new setting. You can only cancel the new setting if you have
not yet clicked
Set.
DISPLAYING SYSTEM INVENTORY
You can display the card description, serial number, hardware version, firmware version and
software version for each card installed in the system.
1 Do one of the following to display the System Inventory window:
• In the
Site Map Navigation window, click System Inventory.
• In the
Tree Navigation window, click System Maintenance, System Inventory.
2 If desired, click
Get to refresh the settings with the most current information.