Chapter 11: Configuring Subtended Systems
Avidia System Configuration and Management User Manual 257
DISPLAYING SUBTENDING INFORMATION
From the ::subtend=> prompt, type the new command in the following format, then press
.
show [<slot>]
Parameters
[<slot>]
The slot and port for which you are displaying subtending information. Omitting this
parameter displays all subtending information.
Example
::subtend=> show 5
The following screen illustrates an example of the show command.
ENTER
::subtend=> show 5
Idx St Pt SVpi SVci DVpi DVci SIp DIp Smask
5 5 1 127 32 127 32 192.169.2.2 192.169.2.1 255.255.255.0
PSt PPt PIp operS
5 1 192.169.2.2 up