Filter
Top Products
Chapter 12: Monitoring Subscriber Connections
Avidia System Configuration and Management User Manual 267
The following table describes the information displayed after you type a perf command.
MONITORING SDSL FRAME CPE STATISTICS
You can monitor the transmitted and received octets for each modem that is attached to an
SDSL frame port.
You view SDSL frame CPE statistics using the command-line interface from the
::interfaces=> prompt. From the ::root=> prompt, type the following command then
press to display the ::interfaces=> prompt.
display stats interfaces
Type cpe then press .
A screen similar to the following displays.
Information Description
Port The port for which the performance data is displayed.
ESs (Network/Customer) The number of errored seconds that occurred during
the specified interval. Errored seconds are seconds
during which errors occur that prevent the payload
from being corrected.
UASs (Network/Customer) The number of unavailable seconds that occurred
during the specified interval. Unavailable seconds are
seconds during which the SDSL frame loop is not
synchronized.
ENTER
ENTER
::interfaces=> cpe
CPEPort LAN inOctets LAN outOctets WAN inOctets WAN outOctets
4.1 0 0 0 0
4.2 0 0 292924 32364