Filter
Top Products
Monitoring SONET Performance
284 Avidia System Configuration and Management User Manual
Parameters
[<port>]
Specifies a particular port for which to display statistics (format slot.port). Each OC3 line
card has two SONET fiber ports, which are identified by 1a and 1b. Omitting this parameter
displays statistics for all SONET ports.
[-far]
Displays statistics for the remote device. Omitting this parameter displays statistics for the
local device.
[-interval (<number>|all)]
Specifies the 15-minute reporting interval for which the statistics are displayed. All
displays the entire 24-hour history. Omitting this parameter displays the current status.
<number>
Type a number from 1 to 96, where 1 represents the most recent 15-minute reporting
interval and 5 represents the fifth most recent 15-minute reporting interval.
Examples
::sonet=> path 12.1a -far -interval 5
::sonet=> path 12.1a -interval 5
The following screen illustrates an example of each path command.
::sonet=> path 12.1a -far -interval 5
Port ESSs SESs CVs UASs Interval
12.1a 0 0 0 0 5
::sonet=> path 12.1a -interval 5
Port ESSs SESs CVs UASs Interval
12.1a 0 0 0 0 5
::sonet=> path
Port Status Width ESSs SESs CVs UASs
12.1a RDI sts3c/stm1 0 0 0 0
12.1b AIS sts3c/stm1 0 0 0 0