Filter
Top Products
Chapter 22: Configuring ATM Virtual Circuits
Avidia System Configuration and Management User Manual 451
Add to an Existing Primary PVCC
1 From the PVCC Configuration Table window, click Add under Backup for the PVCC for which
you will create a backup.
The following Add PVCC Dual Homing Backup Line window displays. In the Primary box, the
Slot, Port, and VPI values for the primary PVCC automatically display.
2 In the
Secondary Slot box, select the slot for the secondary or backup line-side card you want
to use for this backup PVCC.
3 In the Secondary Port box, select the port number for the secondary line-side card you want
to use for this backup PVCC.
4 In the
Secondary VPI box, type a network-side VPI for this backup PVCC. The VPI number
can be either the same value as the primary PVCC or a different value for the backup
PVCC.
See the table on page 24 for a summary of the supported VPI ranges for each card.
5 In the
Secondary box, type a network-side VCI for this backup PVCC. The VCI number can
be either the same value as the primary PVCC or a different value for the backup PVCC.
6 Do one of the following:
• To activate the secondary or backup PVCC and close the
Add PVCC Dual Homing Backup
Line
window, click Set, then in the confirmation dialog click Back.
• To return to the
PVCC Configuration Table window without deleting the table entry,
click
Cancel.