Filter
Top Products
Monitoring SONET Performance
282 Avidia System Configuration and Management User Manual
Parameters
[<port>]
Specifies a particular port for which to display statistics (format slot.port). Each OC3 line
card has two SONET fiber ports, which are identified by 1a and 1b. Omitting this parameter
displays statistics for all SONET ports.
[-far]
Displays statistics for the remote device. Omitting this parameter displays statistics for the
local device.
[-interval (<number>|all)]
Specifies the 15-minute reporting interval for which the statistics are displayed. All
displays the entire 24-hour history. Omitting this parameter displays the current status.
<number>
Type a number from 1 to 96, where 1 represents the most recent 15-minute reporting
interval and 5 represents the fifth most recent 15-minute reporting interval.
Examples
::sonet=> line 12.1a -far -interval 5
::sonet=> line 12.1a -interval 5
::sonet=> line
The following screen illustrates all three line commands.
::sonet=> line 12.1a -far -interval 5
Port ESSs SESs CVs UASs Interval
12.1a 0 0 0 0 5
::sonet=> line 12.1a -interval 5
Port ESSs SESs CVs UASs Interval
12.1a 0 0 0 0 5
::sonet=> line
Port Status ESSs SESs CVs UASs
12.1a AIS 0 0 0 0
12.1b AIS 0 0 0 0