Filter
Top Products
Configuring SDSL Cell Line Profiles
400 Avidia System Configuration and Management User Manual
Adding SDSL Cell Line Profiles
You add SDSL cell line profiles from the SDSL Cell Line Profile Table window.
1 In the
Code box, select the line coding.
The line code sets the line coding for the port. Currently,
2B1Q is the only supported line
coding.
2B1Q SDSL cell technology provides the equivalent of 1.544 Mbps digital
transmission rates, plus signaling over two copper pairs.
2 In the Rate Mode box, select the desired rate mode.
The rate mode defines the form of transmit rate adaptation. Currently
Fixed Rate is the only
supported rate mode.
Fixed Rate means the loop must be able to come up at the specified
maximum transmit rate (Step 3), or it does not come up at all.
3 In the
Rate box, enter the desired transmit rate, in kbps.
The valid range supported by the SDSL cell card is from 64 to 2,048, in increments of 64.
However, the specified rate must be supported by the remote modem. See the remote
modem documentation to verify the supported data rates.
4 Click
Add to add the SDSL cell line profile.