Filter
Top Products
Configuring IDSL Line Profiles
128 Avidia System Configuration and Management User Manual
(path|seg)
The performance monitoring mode, which determines how IDSL current performance data
(see “Monitoring IDSL Current Performance” on page 274) and diagnostic data (see
“Managing IDSL Diagnostics” on page 348) are collected.
path—Statistics are reported for each segment of the connection path (loop)
cumulatively. In the customer direction, node 0 (Avidia system) reports statistics for the
first segment, node 1 reports statistics for the first and second segments, etc. In the network
direction, node 0 (Avidia system) reports statistics for all the segments, node 1 reports
statistics for all but the first segment, and so on.
seg (segmented)—Statistics are reported for each segment of the connection path (loop).
In both the customer and network directions, node 0 (Avidia system) reports statistics for
the first segment, node 1 reports statistics for the second segment, and so on.
<SES threshold>
The number of block errors required for defining a severely errored second. The range is 1
to 15, with 3 as the default. A block error is generated any time there is a CRC violation
detected on an IDSL superframe.
Example
::line=> new 128 path 4
Displaying IDSL Line Profiles
From the ::line=> prompt, type the show command in the following format then press
.
show [<index>]
Parameter
[<index>]
The IDSL line profile table index number of the profile you want to display. Omitting this
parameter displays the entire IDSL line profile table.
Examples
::line=> show 1
::line=> show
ENTER