Filter
Top Products
Configuring SDSL Frame Line Profiles
112 Avidia System Configuration and Management User Manual
Adding SDSL Frame Line Profiles
Currently, Fixed Rate is the only supported rate adaptation mode, therefore all SDSL frame line
profiles are automatically configured for Fixed Rate.
From the ::line=> prompt, type the new command in the following format then press
to create a new SDSL frame line profile.
new <rate>
Parameters
<rate>
The desired transmit rate, in kbps. The valid range supported by the SDSL frame card is
from 64 to 2,048, in increments of 64. However, the specified rate must be supported by
the remote modem. See the remote modem documentation to verify the supported data
rates.
Example
::line=> new 768
Displaying SDSL Frame Line Profiles
From the ::line=> prompt, type the show command in the following format then press
.
show [<index>]
Parameter
[<index>]
The SDSL frame line profile table index number of the profile you want to display.
Omitting this parameter displays the entire SDSL line profile table.
ENTER
ENTER