Filter
Top Products
Chapter 20: Configuring Subscriber Services
Avidia System Configuration and Management User Manual 401
Deleting SDSL Cell Line Profiles
1 In the SDSL Cell Line Profile Table window, locate the table row that contains the SDSL cell
line configuration profile you want to delete.
Click and if necessary to view the entire table. displays the beginning of the
table. displays the next page of the table.
2 Select the
Delete check box next to the row that contains the profile you want to delete. To
select the
Delete check box for all rows (except the default profile, which cannot be
deleted), click
Check All.
If you decide not to delete a selected row, clear the
Delete check box next to the row. Click
Clear All to clear the Delete check box for all rows.
3 Click
Delete Checked Row(s) to delete the profiles.
A confirmation dialog displays.
4 Do one of the following:
• Click
OK to delete the selected table rows.
• Click
Cancel to not delete the table rows.
CONFIGURING SDSL CELL ALARM PROFILES
SDSL cell alarm profiles determine the conditions that generate SNMP traps. When the
configured thresholds are met or exceeded, the SNMP agent sends a trap to the configured trap
receiver(s). Only one trap is sent for each 15-minute data collection period. You assign alarm
profiles to SDSL ports during port configuration. A default profile exists with an index of 1.
You cannot delete the default profile. Setting the threshold value to zero disables the trap.
To configure an SDSL cell alarm profile:
1 Open the
SDSL Cell Port Configuration window (see “Configuring SDSL Cell Service” on
page 404).
2 Click the Alarm Profile Browse button.
You cannot delete profiles that are assigned to ports. You cannot delete the
default profile.