Filter
Top Products
Configuring Global IP Routing Settings
502 Avidia System Configuration and Management User Manual
Modifying System STP Parameters
In the System Bridging Configuration window:
1 In the
Priority box, type the priority of the system (the entire chassis) within the network.
The valid range is 0 to 65535. The value 0 indicates the highest priority. The default value
is 32768.
2 In the
Max Age box, type the number of seconds after which entries in the Bridging Table
will be deleted if they are not re-learned. The valid range is 6 to 40. The default value is 20.
3 In the Hello Time box, type the interval, in seconds, at which you want the system to send
Spanning Tree Protocol packets. The valid range is 1 to 10. The default value is 2.
4 In the Forward Delay box, type the number of seconds you want the system to wait before
changing the state of a particular interface (e.g., to blocked). The valid range is 4 to 30. The
default value is 15.
This delay prevents the interface states from changing so rapidly that the STP cannot keep
up with the current topology of the network and cannot therefore manage bridging
efficiently.
5 Do one of the following:
• To activate the settings and close the
System Bridging Configuration window, click Set.
• To cancel the settings and close the
System Bridging Configuration window, click Close.
CONFIGURING GLOBAL IP ROUTING SETTINGS
You configure global settings to enable IP routing and specify the time-to-live value for IP
datagrams.
You configure global IP routing settings from the System Settings window. Do one of the
following to open the
System Settings window.
• In the
Site Map Navigation window, click System Settings.
• In the
Tree Navigation window, click Configuration Management, System Setup, System
Settings
.