Filter
Top Products
Chapter 16: Monitoring System Alarms and Status
Avidia System Configuration and Management User Manual 339
MONITORING SYSTEM HARDWARE STATUS
You monitor system status information, such as fuse and power alarms, and whether a critical,
major or minor alarm condition exists. From the ::root=> prompt, type the following
command then press .
display hardware system
A screen similar to the following displays.
The following table describes the system status information that displays when you type the
display hardware system command.
Information Description
Power Chassis power supply status. Options:
• Unknown
—Unknown power supply status.
• Failure
—One or both power supplies has failed.
• OK
—Both power supplies are operational.
Fan Chassis fan status. Options:
• Unknown
—Unknown fan status or no fans exist.
• Failure—One of the fans has failed.
• OK
—All fans are operational.
• Hightemp
—The chassis temperature is higher than the range
required for operation.
CRT Chassis critical alarm LED status. Indicates whether a critical alarm
condition exists. Displays either OFF or ON.
MAJ Chassis major alarm LED status. Indicates whether a major alarm
condition exists. Displays either OFF or ON.
ENTER
::hardware=> system
Power Fan CRT MAJ MIN AUD FAN1 FAN2 FAN3 FAN4 PWR_MIN IP1 IP2 FU1 FU2
OK OK OFF OFF OFF ON OFF OFF OFF OFF ON OFF OFF OFF OFF
Port Card Description Most_Serious_Alarm Severity
1 Avidia Management Card PSFailureAlarm Critical