Filter
Top Products
Chapter 15: Monitoring Physical Interfaces
Avidia System Configuration and Management User Manual 321
The following screen illustrates examples of both ds1 interfaces commands.
The following table describes the information displayed after you type a ds1 interface
command.
Column Description
Port The slot and port for which the information is displayed.
Speed The current interface bandwidth in bits per second.
Admin Status The configured state of the interface. Options:
• Up—The interface is activated.
• Down
—The interface is deactivated.
Oper Status The current operational state of the interface. Options:
• Up
—The interface is operational and ready to receive packets.
• Down
—The interface is not operational.
LinkUpDown TrapEnable Indicates whether trap generation is enabled or disabled.
High Speed The current speed, in Mbps. This value is rounded to the nearest of
the following values:
• 2
• 6
• 8
Connector Present Whether the physical connector is present or not. True indicates the
connector is present. False indicates the connector is absent.
::interfaces=>ds1 4.3
Admin Oper LinkUpDown High Connector
Port Speed Status Status TrapEnable Speed Present
4.3 1544000 up up enabled 2 true
::interfaces=>ds1
Admin Oper LinkUpDown High Connector
Port Speed Status Status TrapEnable Speed Present
4.1 1544000 up up enabled 2 true
4.2 1544000 up down enabled 2 true
4.3 1544000 up up enabled 2 true
4.4 1544000 up dormant enabled 2 true