Filter
Top Products
Chapter 20: Configuring Subscriber Services
Avidia System Configuration and Management User Manual 393
6 If handshaking is set to g.hs, use the LineCode column to set the line code, either g.lite or
g.dmt.
7 Do one of the following:
• Click
Set to activate the new settings.
• Click
Get to cancel the new settings. You can only cancel the settings if you have not
clicked
Set.
• In the
Slot box select the slot number to configure ports on another card.
CONFIGURING SDSL FRAME LINE PROFILES
SDSL line profiles contain a preconfigured set of parameters, which include the rate adaptation
mode and transmit rate. You assign SDSL line profiles to ports during port configuration. A
default profile exists with an index of 1. You cannot delete the default profile.
To configure an SDSL line profile:
1 Open the
SDSL Port Configuration window (see “Configuring SDSL Frame Service” on
page 397).
2 Click the Line Profile Browse button.
The
SDSL Line Profile Table window displays the configured SDSL line profiles. Click and
if necessary to view the entire table. displays the beginning of the table. displays
the next page of the table.