Filter
Top Products
Chapter 22: Configuring ATM Virtual Circuits
Avidia System Configuration and Management User Manual 435
2 In the Admin Status box, select the administrative status for the PVPC (Up or Down).
Up activates the PVPC. Down deactivates the PVPC.
3 In the
Channel Slot box, select the channel-side card slot number you want to use for
this PVPC.
4 In the Channel Port box, select the channel-side card port number you want to use for
this PVPC.
5 In the Channel VPI box, type the subscriber-side VPI for this PVPC.
See the table on page 24 for a summary of the supported VPI ranges for each card.
6 In the
Line Slot box, select the slot number of the line-side card you want to use for this
PVPC.
7 In the Line Port box, select the line-side card port number you want to use for this PVPC.
8 In the
Line VPI box, type a network-side VPI for this PVPC.
See the table on page 24 for a summary of the supported VPI ranges for each card.
9 If you want to create a backup PVPC for the primary PVPC, in the
Line box select Backup.
Then, do the following:
a In the Backup Slot box, select the slot number for the secondary line-side card you want
to use for this backup PVPC.
b In the Backup Port box, select the port number for the secondary line-side card you want
to use for this backup PVPC.
c In the Backup VPI box, type a network-side VPI for this backup PVPC. The VPI
value can be either the same value as the primary PVPC or a different value for the
backup PVPC.
See the table on page 24 for a summary of the supported VPI ranges for each card.
10 In the
Traffic Profile box, click Browse to display the ATM Traffic Descriptor Configuration Table
window.