Filter
Top Products
Chapter 6: Configuring Subscriber Services
Avidia System Configuration and Management User Manual 135
Example
::clock=> show 5
The following screen illustrates an example of the show clock command.
Modifying IDSL Port Configurations
Each IDSL port is automatically assigned a default configuration. This procedure describes how
to modify the configuration to reflect the desired service.
1 You configure IDSL ports from the ::idsl=> prompt. From the ::root=> prompt,
type the following command then press to display the ::idsl=> prompt.
configuration idsl
2 From the ::idsl=> prompt, type the following command then press to display
the ::line=> prompt.
profile line
3 Type show then press to display the configured line profiles.
4 Note the index number of the line profile you want to assign to the channel.
5 Type the following command then press to display the ::alarm=> prompt.
configuration idsl profile alarm
6 Type show then press to display the configured alarm profiles.
7 Note the index number of the alarm profile you want to assign to the channel.
8 Type the following command then press to display the ::idsl=> prompt.
configuration idsl
9 Type the set command in the following format then press .
set <port> <lpindex> <apindex> (up|down) [<circuit id>]
::clock=> show 5
IDSL clock source for slot 5: local
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER