Filter
Top Products
Monitoring System Alarms and Events
328 Avidia System Configuration and Management User Manual
MONITORING SYSTEM ALARMS AND EVENTS
You monitor system alarms and events from the ::admin=> prompt. From the ::root=>
prompt, type admin then press to display the ::admin=> prompt.
To display information about alarms and events that have occurred since the system was
powered up, including internal alarms such as memory and system fans, from the ::admin=>
prompt type the log command in the following format then press .
log (alarm|all|debug|error|info|trace)
Parameter
(alarm|all|debug|error|info|trace)
alarm displays the alarms that have occurred since the system was powered up
all displays all system events, including alarms, traps, changes in slot status and
diagnostic traces
debug is for technician use only
error is for technician use only
info is for technician use only
trace is for technician use only
Examples
::admin=>log alarm
::admin=>log all
When you type log alarm, a screen similar to the following displays.
ENTER
ENTER
::admin=>log alarm
Timestamp Type Slot Description
THU DEC 23 06:50:40 1999 alarm Critical, Alarm#100:chassis power alarm
THU DEC 23 06:50:40 1999 alarm 4 No Alarm, Alarm #104:chassis line card
down