Filter
Top Products
Monitoring Bridge Port Status
306 Avidia System Configuration and Management User Manual
MONITORING BRIDGE PORT STATUS
You can monitor the number of discarded packets on each configured logical bridge session
port.
You monitor bridge port status using the command-line interface from the ::bridge=>
prompt. From the ::root=> prompt, type the following command then press to
display the ::bridge=> prompt.
display stats bridge
Type port then press .
A screen similar to the following displays.
Information Description
BridgePort The logical bridge session port number. The system automatically
assigns this number when you configure a bridging session.
Slot
Port
The physical slot and port number of the bridge.
Vpi
Vci
The VPI and VCI of the bridge.
Delay ExceededDiscards The number of packets that were discarded due to excessive delay in
forwarding them.
MTU ExceededDiscards The number of packets that were discarded due to the maximum size
exceeding the maximum allowable packet size for the logical bridge
port. The maximum size is 9K for ATM ports and 1.5K for Ethernet
ports.
ENTER
ENTER
::bridge> port
Delay MTU
BridgePort Slot Port Vpi Vci ExceededDiscards ExceededDiscards
111010 0