Filter
Top Products
Chapter 25: Monitoring Subscriber Connections
Avidia System Configuration and Management User Manual 509
Current State (Upstream/Downstream) The current status of the ADSL loop. Options:
• noDefect
—There are no errors on the line.
• lossOfLink—The ATU-C was unable to link with the
ATU-R.
• lossOfFraming
—The line is not receiving valid
frames.
• lossOfSignal
—The line is not receiving valid
signal.
• lossOfPower
—The line is not receiving power.
• lossOfSignalQuality—The margin has fallen
below the configured target margin or the BER
exceeds 10
-7
.
• dataInitFailure—The ATU was unable to initialize.
• configInitFailure
—The ATU was unable to
initialize because the ATU at the other end does not
support the requested configuration.
• protocolInitFailure
—The ATU was unable to
initialize because of an incompatible protocol used
by the peer at the other end.
• noPeerAtuPresent
—The ATU was unable to
initialize because no activation sequence was
detected from the ATU at the other end.
Vendor ID (ATU-R/ATU-C) The vendor ID of the ATU-C and the ATU-R. not
allocated means there is no ATU-R present in the
circuit.
Version Number (ATU-R/ATU-C) The version number of the ATU-C and the ATU-R.
Status Box Description