Filter
Top Products
Chapter 24: Configuring Bridging and Routing
Avidia System Configuration and Management User Manual 499
To modify RIP information:
1 In the
RIP Configuration Table window, click .
The
Modify RIP Configuration window opens.
2 To modify the Send mode in the
Send box select the desired setting (Do Not Send, RIP Version
1
, RIP1 Compatible, RIP Version 2).
3 To modify the Receive mode, in the
Receive box select the desire setting (RIP 1, RIP 2, RIP
1 or RIP 2
, Do Not Receive).
4 To modify the hop count, in the
Hop Count box type the number of hops the packets are
allowed to cross before arriving at their destination.
5 To modify the authentication type, in the
Authentication Type box, select the desired setting
(
No Authentication or Simple Password). You can only set the authentication type to Simple
Password
if you are using a Send or Receive mode that supports RIP 2.
The authentication type determines whether a password is required for the router to learn
information from the session ports in the same network segment.
6 If you selected
No Authentication in Step 5, go to Step 8.