Filter
Top Products
Chapter 23: Configuring Frame Relay Interworking
Avidia System Configuration and Management User Manual 475
e In the DE Value box, select the value used when DE Mode is set to 2 (0 or 1).
The DE Value determines the content of the frame relay DE field when
DE Mode is set
to
2.
0—The network cannot discard frames.
1—The network can discard frames.
10 Do one of the following:
• To save the frame relay configuration click
Set, then in the confirmation dialog click
Back to return to the Frame Relay Interworking Configuration Table window.
• To cancel the configuration and return to the
Frame Relay Interworking Configuration
Table
window, click Cancel.
MODIFYING A FRAME RELAY CONFIGURATION
You modify a frame relay configuration from the Frame Relay Interworking Configuration Table
window. You can only modify the parameters appropriate for the existing configuration. For
example, if FRF.8 is the interworking standard, you cannot select FRF.5. Other parameters,
such those for channel, line, and circuit, display for your reference.
1 In the
Frame Relay Interworking Configuration Table window, locate the table row that contains
the frame relay interworking configuration you want to modify.
Click and if necessary to view the entire table. displays the beginning of the
table. displays the next page of the table.
2 Click next to the row that contains the information you want to modify. The
Modify
Frame Relay Interworking Configuration
window displays.