Filter
Top Products
Configuring DS3 Service
424 Avidia System Configuration and Management User Manual
The DS3 Configuration window displays the following status information that cannot be
changed.
3 In the
LBO box, select the line length (0 to 225 feet (68.58 m) or 225+ feet ).
4 In the
Framing box, select the type of line connected to the selected port (M23 or CbitParity).
CbitParity is not currently supported.
5 In the
Transmit Clock Source box, select the type of timing in use (loopTiming or localTiming).
6 Use the Loopback box to initiate a communication path loopback for the port. See
“Initiating Communication Path Loopbacks” on page 563.
Information Descriptions
Card Description
Slot
Port
The slot number, port number and description of the selected card.
Oper Status The current operational status of the selected port.
• Up indicates the port is operational and passing data.
• Down indicates that the port is not operational.
Elapsed Time The number of seconds that have elapsed since the current 15-minute
data collection period began.
Valid Intervals The number of 15-minute data collection intervals supported. The Avidia
system supports 96 intervals, or 24 hours, of data collection.
Invalid Intervals The Avidia system does not have invalid intervals, therefore
0 displays.
Send Code The type of data currently being transmitted. Currently, only
SendNoCode is supported, indicating that the line is sending looped or
normal data.
Line Status The status of the line interface. Options:
• dsx3NoAlarm—No alarms are present.
• dsx3RcvRAIFailure—Receiving a remote alarm indication.
• dsx3XmitRAIAlarm—Transmitting a remote alarm indication.
• dsx3RcvAIS—Receiving an AIS.
• dsx3XmitAIS—Transmitting an AIS.
• dsx3LOF—Receiving a loss-of-frame error.
• dsx3LOS—Receiving a loss-of-signal error.
Last Line Status Change The time and date of the last line status change.
Loopback Status The type of physical layer loopback in effect. See “Initiating
Communication Path Loopbacks” on page 563 for information about
loopbacks.