Filter
Top Products
Chapter 20: Configuring Subscriber Services
Avidia System Configuration and Management User Manual 399
4 In the Alarm Profile boxes, type the desired alarm profile index for each port you want to
configure.
Click the Alarm Profile Browse button display the configured profiles. If the desired profile
is not yet configured, you can configure it now. See “Configuring SDSL Frame Alarm
Profiles” on page 395 for instructions.
5 Do one of the following:
• Click
Set to activate the new settings.
• Click
Get to cancel the new settings. You can only cancel the settings if you have not
clicked
Set.
• In the
Slot box select the slot number to configure ports on another card.
CONFIGURING SDSL CELL LINE PROFILES
SDSL cell line profiles contain a preconfigured set of parameters, including the rate adaptation
mode and the transmit rate. You assign line profiles to SDSL ports during port configuration. A
default profile exists with an index of 1. You cannot delete the default profile.
To configure the SDSL cell line profile:
1 Open the
SDSL Cell Port Configuration window (see “Configuring SDSL Cell Service” on
page 404).
2 Click the Line Profile Browse button.
The
SDSL Cell Line Profile Table window displays the configured SDSL cell line profiles. Click
and if necessary to view the entire table. displays the beginning of the table.
displays the next page of the table.