Filter
Top Products
Chapter 15: Monitoring Physical Interfaces
Avidia System Configuration and Management User Manual 317
The following table describes the information displayed after you type an adsl command.
MONITORING SDSL FRAME INTERFACES
From the ::interfaces=> prompt, type the following command, then press to
display the ::sdsl=> prompt.
sdsl
From the ::sdsl=> prompt, type the frame command, then press .
frame [<port>]
Parameter
[<port>]
The specific port for which you want to display interface statistics (format slot.port).
Omitting this parameter displays statistics for all SDSL frame interfaces.
Information Description
Port Number The port number of the interface.
Interface Description A text string describing the type of interface.
Speed The current interface bandwidth in bits per second.
Admin Status The configured state of the interface. Options:
• Up
—The interface is activated.
• Down
—The interface is deactivated.
Oper Status The current operational state of the interface. Options:
• Up
—The interface is operational and ready to
receive packets.
• Down
—The interface is not operational.
ENTER
ENTER