Filter
Top Products
Chapter 29: System Maintenance and Administration
Avidia System Configuration and Management User Manual 561
Adding OAM Loopbacks
1 In the OAM Loopback Table window, click .
The
Add OAM Loopback Entry window displays.
2 In the
Slot and Port boxes, select the slot and port where the loopback will be initiated.
3 In the
OAM Flow Type box, select either F4 or F5.
OAM F4 flow loopbacks test circuits at a VPC level (requires a VPI only), where OAM F5
flow loopbacks test circuits at a VCC level (requires a VPI and a VCI).
4 In the
VPI and VCI boxes, do one of the following:
• For an OAM Flow Type F4 loopback, type the VPI for the VPC.
• For an OAM Flow Type F5 loopback, type the VPI and VCI for the VCC.