Filter
Top Products
Chapter 6: Configuring Subscriber Services
Avidia System Configuration and Management User Manual 125
Adding SDSL Cell Port Configurations
Each SDSL cell port is automatically assigned a default configuration. The default profile index
number for each SDSL cell profile type is 1. This procedure describes how to modify the
configuration to reflect the desired service.
1 From the ::cell=> prompt, type the following command then press to display
the ::line=> prompt.
profile line
2 Type show then press to display the configured line profiles.
3 Note the index number of the line profile you want to assign to the channel.
4 Type the following command then press to display the ::alarm=> prompt.
configuration sdsl cell profile alarm
5 Type show then press to display the configured alarm profiles.
6 Note the index number of the alarm profile you want to assign to the channel.
7 Type the following command then press to display the ::cell=> prompt.
configuration sdsl cell
8 Type the set command in the following format then press .
set <port> <lpindex> <apindex> (up|down)
[-scramble (enable|disable)]
Parameters
<port>
The channel slot and port number (format slot.port).
<lpindex>
The index number of the line profile you want to assign to this channel.
<apindex>
The index number of the alarm profile you want to assign to this channel.
(up|down)
The administrative status of the line: Up activates the port. Down deactivates the port.
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER