Filter
Top Products
Creating Network Maps
6-60 Editing Your Map
3. Select Edit —>Copy from the primary window menu bar, the Copy button
on the toolbar, or the Copy option on the right-mouse map menu.
4. Create, open, or activate the map to which you wish to add the copied icons,
and select Edit —>Paste Special (No IPs) from the primary window menu
bar.
5. Place the No IP Paste cursor in the location to which you wish to paste the
icon group, and click the mouse button to paste. (Note that the bounding box
surrounding the cursor indicates the size of the icon group you have copied.)
The icons display on the map in their original arrangement, but will be labeled
N/C (not connected).
6. To define each icon, double-click the undefined symbol; the standard Insert
Device window (Figure 6-17, page 6-24) opens. Proceed as described in
Adding a Device Directly to a Map, beginning on page 6-23. If necessary,
the icon will update automatically to reflect the appropriate node type.
Fourth, when you use the cut and paste functions to move a node icon or any graphic
element in a map, clicking Paste will change the cursor to a special paste cursor; you can
move this paste cursor around on the map or onto another map, then click again to paste
the element.
And finally, note that the Edit menu contains two selection options: Select All will
highlight every element in the active map; Select All Nodes will highlight only the device
(or “node”) icons.
Protecting Your Maps from Editing: The Lock Feature
Once you have configured your maps with all the node icons and other graphic elements
you need, you can protect them from accidental editing by using the Lock feature.
Locking a map allows only three actions to be performed: you can single-click an icon to
select it (as a means of launching any applicable tool against it), right-mouse click an icon
to access the Manage option on the resulting menu, or you can double-click it to launch
the Chassis Manager application.
To lock a map:
1. With the map you wish to lock open and active, select View—>Lock from the
primary window menu bar.
or
Select File—>Open Map from the primary window menu bar. In the resulting
Open window, select the Open as read-only option. The map will open in a
locked state.
or
Open the Map View Properties window for the map of interest, click to select
the Lock View option, then click OK to close the Properties window and SET
your changes.