Filter
Top Products
3-1
Chapter 3
Discovering Nodes
Accessing the Discover Manager window; creating and modifying Discover scripts; executing Discover
scripts; the Discover process; starting the Discover Wizard; launching the Scheduler application; using
the IP or Host Locator; using the Subnets window
The Discover Manager application allows you to locate devices on a network. You can
perform a Discover process within a specified range of IP (Internet Protocol) addresses, on
an entire subnet, or on a combination of the two. The Discover application automatically
explores the defined network segment, creates a list of discovered devices, and assigns an
icon to each of them. The discovered nodes are then automatically integrated into
NetSight Element Manager’s central node database, and consequently displayed as
appropriate in any List or Tree Views (see Chapter 4, List Views, and Chapter 5, Tree
Views, for more information).
The Discover application operates using scripts, which are created and saved within the
application (allowing them to be run repeatedly if desired). You can create a new Discover
script by using either the Discover Manager window (Figure 3-1) or the Discover Wizard,
which will lead you step by step through the Discover process (see Starting the Discover
Wizard on page 3-19). The following sections describe the use of the Discover Manager
window to create, modify, and execute Discover scripts.
Accessing the Discover Manager Window
To access the Discover Manager window from the NetSight Element Manager primary
window:
1. Select Tools —> Discover Manager from the primary window menu bar.
or
Click the Discover Manager button ( ) on the NetSight Element Manager
Standard toolbar.
The Discover Manager window, Figure 3-1, opens.