Filter
Top Products
7-60
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter 7 Configuring Virtual Connections
Configuring Backup Addresses for Soft PVC and Soft PVP Connections
Examples
The following example shows the configuration of the redundant standby soft PVC destination (shown
in Figure 7-9) on the switch C8540-1.
C8540-1# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
C8540-1(config)# atm soft redundancy group backup_vc
C8540-1(atmsoft-red)# nsap-address 47.0091.8100.0000.1111.1111.1111.1111.1111.1111.00
C8540-1(atmsoft-red)# exit
C8540-1(config)# interface atm 1/1/1
C8540-1(config-if)# atm soft redundancy member backup_vc standby
C8540-1(config-if)# end
C8540-1#
The following example shows the configuration of the active load balanced soft PVC destination (shown
in Figure 7-9) on the switch C8540-1.
C8540-1# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
C8540-1(config)# atm soft redundancy group backup_vc
C8540-1(atmsoft-red)# load-balance
C8540-1(atmsoft-red)# nsap-address 47.0091.8100.0000.1111.1111.1111.1111.1111.1111.00
C8540-1(atmsoft-red)# exit
C8540-1(config)# interface atm 1/1/0
C8540-1(config-if)# atm soft redundancy member backup_vc active
C8540-1(config-if)# end
C8540-1#
The following example shows the configuration of the redundant standby soft PVC destination (shown
in Figure 7-10) on the switch C8540-2.
C8540-2# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
C8540-2(config)# atm soft redundancy group backup_vc
C8540-2(atmsoft-red)# nsap-address 47.0091.8100.0000.1111.1111.1111.1111.1111.1111.00
C8540-2(atmsoft-red)# exit
C8540-2(config)# interface atm 1/1/0
C8540-2(config-if)# atm soft redundancy member backup_vc standby
C8540-2(config-if)# end
C8540-2#
Step 8
Switch# show atm soft redundancy group
[group-name]
Displays the ATM soft redundancy group
configuration.
Step 9
Switch# show atm addresses Displays the ATM NSAP address of the
redundant soft PVC destination.
Command Purpose