Filter
Top Products
Index
IN-18
ATM Switch Router Software Configuration Guide
OL-7396-01
J
jumbo frame configuration 25-17
jumbo frames, configuration 25-16 to 25-17
jumbo frames, definition 25-16
jumbo frames, display 25-17
K
keepalive command 20-16
keepalive interval 20-16
L
label bindings, MPLS
description
16-25
Label Distribution Protocol. See LDP
label edge routing. See LER
label forwarding information base. See LFIB
label switch controller. See LSC
label switching router. See LSR
label switch protocol
16-23
label VC. See LVC
LANE
assigning components to subinterfaces
14-4
BUSs 14-11 to 14-13
clients 14-11 to 14-13
clients on ATM router module interfaces,
examples
25-11 to 25-16
concept (figure) 14-2
configuration plan and worksheet 14-3
configuration task list 14-2
database
configuration task list
14-7
name 14-7
restricted membership 14-9
setting up 14-7
unrestricted membership 14-8
ELANs and subnetworks 14-12, 14-13
enabling the configuration server 14-10
ESI template 14-4
ESI values derived from MAC address 14-4
Ethernet clients 14-14
examples 14-17 to 14-32
LECSs
addresses
14-7
configuring 14-4
LESs 14-11 to 14-13
overview 14-1
prefix template 14-4
redundant LECSs 14-15
routing between ELANs 14-11, 14-12
SSRP 14-15
Token Ring 14-13
troubleshooting 14-16
values of wildcard characters (table) 14-4
wildcards in ATM address templates 14-4
lane client-atm-address command 14-14
lane client ethernet command
LANE clients on a subinterface
14-13, 25-11
LANE Ethernet clients 14-14
LANE server and clients 14-12
redundant LECSs 14-15
lane client tokenring command
LANE clients on a subinterface
14-13, 25-11
LANE server and clients 14-12
redundant LECSs 14-15
lane config auto-config-atm-address command 14-11
lane config database command 14-11
LANE configuration server database configuration mode
description
2-14
table 2-4
lane database command
default ELANs
14-8
entering command mode 2-14
redundant LECSs 14-15
restricted-membership ELANs 14-9
unrestricted-membership ELANs 14-8