Cisco Systems OL-7396-01 Network Router User Manual


 
22-16
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter 22 Configuring Quality of Service
IP QoS—Functional Differences Between Modules (Catalyst 8540 MSR)
Switch#
The following example uses the show atm interface resource command to show the amount of
bandwidth allocated for IP QoS:
Switch# show atm interface resource atm 11/0/1
Resource Management configuration:
CAC Configuration to account for Framing Overhead : Disabled
Pacing: disabled 0 Kbps rate configured, 0 Kbps rate installed
overbooking : disabled
Per Class OverBooking :
vbr-rt : disabled, vbr-nrt : disabled
abr : disabled, ubr : disabled
Service Categories supported: cbr,vbr-rt,vbr-nrt,ubr
Link Distance: 0 kilometers
Controlled Link sharing:
Max aggregate guaranteed services: none RX, none TX
Max bandwidth: none cbr RX, none cbr TX, none vbr RX, none vbr TX,
none ubr RX, none ubr TX
Min bandwidth: none cbr RX, none cbr TX, none vbr RX, none vbr TX,
none ubr RX, none ubr TX
Best effort connection limit: disabled 0 max connections
Max traffic parameters by service (rate in Kbps, tolerance in cell-times):
Peak-cell-rate RX: none cbr, none vbr, none ubr
Peak-cell-rate TX: none cbr, none vbr, none ubr
Sustained-cell-rate: none vbr RX, none vbr TX
Minimum-cell-rate RX: none ubr
Minimum-cell-rate TX: none ubr
CDVT RX: none cbr, none vbr, none ubr
CDVT TX: none cbr, none vbr, none ubr
MBS: none vbr RX, none vbr TX
Resource Management state:
Bandwidth Allocated to IPQoS (in Kbps): 500000
Total Available Interface Bandwidth (in Kbps): 251999
Available bit rates (in Kbps):
251999 cbr RX, 251999 cbr TX, 251999 vbr RX, 251999 vbr TX,
0 abr RX, 0 abr TX, 251999 ubr RX, 251999 ubr TX
Allocated bit rates:
198000 cbr RX, 198000 cbr TX, 0 vbr RX, 0 vbr TX,
0 abr RX, 0 abr TX, 0 ubr RX, 0 ubr TX
Best effort connections: 136 pvcs, 0 svcs
Switch#
Supported and Unsupported Features
The following features are supported:
Enhanced ATM Router Module supports classification based on Behavior Aggregate and Multifield
classifiers, marking, metering, and policing.
XRED is supported for congestion control.
Weighted fair queuing is the only queuing algorithm supported.
Maximum of 4 output queues.
Maximum of 16 classes in input policy map.
Maximum of 64 subinterfaces with input policy.
Maximum of 32 policers per physical interface.
The following features are not supported: