Cisco Systems OL-7396-01 Network Router User Manual


 
9-36
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter 9 Configuring Resource Management
Configuring Physical and Logical Interface Parameters
Displaying the Service Category Policing on an Interface
To display the service category policing configured on an interface, use the following user EXEC
commands:
Example
The following example shows service category policing configured on ATM interface 1/1/1:
Switch> show atm interface atm 1/1/1
Interface: ATM1/1/1 Port-type: oc3suni
IF Status: UP Admin Status: up
Auto-config: enabled AutoCfgState: completed
IF-Side: Network IF-type: NNI
Uni-type: not applicable Uni-version: not applicable
Max-VPI-bits: 8 Max-VCI-bits: 14
Max-VP: 255 Max-VC: 16383
ConfMaxSvpcVpi: 255 CurrMaxSvpcVpi: 255
ConfMaxSvccVpi: 255 CurrMaxSvccVpi: 255
ConfMinSvccVci: 35 CurrMinSvccVci: 35
Svc Upc Intent: by sc Signalling: Enabled
ATM Address for Soft VC: 47.0091.8100.0000.00e0.f75d.0401.4000.0c80.9010.00
Configured virtual links:
PVCLs SoftVCLs SVCLs TVCLs PVPLs SoftVPLs SVPLs Total-Cfgd Inst-Conns
4 0 0 0 0 0 0 4 4
Logical ports(VP-tunnels): 0
Input cells: 4927 Output cells: 3553
5 minute input rate: 0 bits/sec, 0 cells/sec
5 minute output rate: 0 bits/sec, 0 cells/sec
Input AAL5 pkts: 2376, Output AAL5 pkts: 2382, AAL5 crc errors: 0
Switch>
In the show atm interface atm command display, if interface service category policing is configured,
the SVC Upc Intent field displays “by sc” (service category).
The following example shows the service category policing configuration of interface ATM 1/1/1:
Switch# show running-config interface atm 1/1/1
Building configuration...
Current configuration : 223 bytes
!
interface ATM1/1/1
no ip address
no ip route-cache
no ip mroute-cache
no atm ilmi-keepalive
atm svc-upc-intent cbr tag
atm svc-upc-intent vbr-rt tag
atm svc-upc-intent vbr-nrt tag
atm svc-upc-intent abr drop
end
Command Purpose
show atm interface atm card/subcard/port Displays the service category policing
configuration.
show run atm interface card/subcard/port Displays the interface service category
policing configuration.