Filter
Top Products
2-13
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter 2 Understanding the User Interface
Accessing Each Command Mode
ATM Accounting File Configuration Mode
ATM accounting file configuration mode provides access to commands used to configure a file for
accounting and billing of virtual circuits (VCs).
To enter ATM accounting file configuration mode from global configuration mode, use the
atm accounting file command followed by an accounting filename; the prompt changes to the ATM
switch router hostname followed by (config-acct-file)#:
Switch(config)# atm accounting file acctng_file1
Switch(config-acct-file)#
To exit ATM accounting file configuration mode and return to global configuration mode, use the exit
command:
Switch(config-acct-file)# exit
Switch(config)#
To exit ATM accounting file configuration mode and return to privileged EXEC mode, use the end
command or press Ctrl-Z:
Switch(config-acct-file)# end
Switch#
For detailed information on configuring ATM accounting, see Chapter 15, “Configuring ATM
Accounting, RMON, and SNMP.”
ATM Accounting Selection Configuration Mode
ATM accounting selection configuration mode provides access to commands used to specify the
connection data to be gathered from the ATM switch router.
To enter ATM accounting selection configuration mode, use the atm accounting selection command and
specify an accounting selection index; the prompt changes to the ATM switch router’s hostname
followed by (config-acct-sel)#:
Switch(config)# atm accounting selection 1
Switch(config-acct-sel)#
To exit ATM accounting selection configuration mode and return to global configuration mode, use the
exit command:
Switch(config-acct-sel)# exit
Switch(config)#