Filter
Top Products
25-55
ATM Switch Router Software Configuration Guide
OL-7396-01
Chapter 25 Configuring ATM Router Module Interfaces
Configuring VC Bundling with IP and ATM QoS
no ip address
!
interface ATM0
no ip address
logging event subif-link-status
!
interface Ethernet0
ip address 9.8.6.3 255.255.0.0
!
interface ATM9/0/0
description ARM2 at PH
no ip address
service-policy output arm2-ph
!
interface ATM9/0/0.1 multipoint
description Connection to BJ
ip address 1.0.0.2 255.0.0.0
bundle ph-bj
protocol ip inarp broadcast
pvc-bundle 2 200 pd on wrr-weight 2 rx-cttr 301 tx-cttr 301 interface ATM0/0/0.10 10
200
precedence 3, 5-7
pvc-bundle 2 201 pd on wrr-weight 2 rx-cttr 302 tx-cttr 302 interface ATM0/0/0.10 10
201
precedence 4
pvc-bundle 2 202 pd on wrr-weight 2 rx-cttr 303 tx-cttr 303 interface ATM0/0/0.10 10
202
precedence 2
pvc-bundle 2 203 pd on interface ATM0/0/0.10 10 203
precedence other
!
!
interface ATM9/0/0.2 multipoint
description Connection to JM
ip address 3.0.0.1 255.0.0.0
bundle ph-jm
protocol ip inarp broadcast
pvc-bundle 2 300 pd on wrr-weight 2 rx-cttr 301 tx-cttr 301 interface ATM0/0/0.11 11
300
precedence 3, 5-7
pvc-bundle 2 301 pd on wrr-weight 2 rx-cttr 302 tx-cttr 302 interface ATM0/0/0.11 11
301
precedence 4
pvc-bundle 2 302 pd on wrr-weight 2 rx-cttr 303 tx-cttr 303 interface ATM0/0/0.11 11
302
precedence 2
pvc-bundle 2 303 pd on interface ATM0/0/0.11 11 303
precedence other
!
!
interface ATM9/0/1
no ip address
!
interface ATM9/0/1.3 multipoint
description dummy
ip address 33.0.0.1 255.0.0.0
atm pvc 2 4000 pd on encap aal5snap inarp 1 interface ATM0/0/0.11 11 4000
!
interface GigabitEthernet11/0/0
description XPIF at PH
ip address 50.0.0.1 255.0.0.0
service-policy input mark
service-policy input ABC-signaling-mark
no cdp enable