Filter
Top Products
Index
IN-17
ATM Switch Router Software Configuration Guide
OL-7396-01
inverse multiplexing over ATM. See IMA
IOS file system
26-2
ip access-group command 12-11
IP access lists
configuration, examples
12-12 to 12-13
configuring 12-9 to 12-14
description 12-9
implicit masks 12-10
logging violations 12-10
styles 12-9
undefined 12-11
virtual terminal lines (note) 12-11
ip address command
ATM ARP client
13-2, 13-4, 25-21, 25-23
classical IP over ATM 13-6, 25-20
IP address and subnet mask 3-8, 16-34
LANE client 14-13, 25-11
LANE server, BUS, and client 14-12
loopback interface 16-3
PVC-based map list 13-7
RFC 1483 25-18
SVC-based map list 13-9
tag switching on the ATM interface 16-4
tag switching on VP tunnels 16-10
TDP control channels 16-8, 16-39
VC bundling 25-31
VC bundling with IP/ATM QoS 25-45
IP addresses
assigned by BOOTP protocol
3-4
configuration prerequisites 3-2
configuring 3-7 to 3-9
configuring parallel interfaces (note) 16-4
displaying configuration 3-8
loopback interfaces 16-3
ping destinations 8-6
set to default 3-4
ip command 13-8, 13-9
ip domain-name command 4-20
IP load sharing
configuring
13-13
ip load-sharing per-packet command 13-13
IP multicast
configuring
25-28
example 25-28
ip multicast-routing command 25-28
IP over ATM. See classical IP over ATM
ip pim command
25-28
IP precedence 22-3
IP QoS
about
22-6
buffer management 22-10
classifier 22-7
configuration examples 22-15, 22-22
configuring buffer groups 22-21
configuring enhanced ATM Router Module
interfaces
22-11
configuring enhanced Gigabit Ethernet interfaces 22-17
configuring policies 22-11
DiffServ 22-6
DSCP 22-6
marker 22-8
meter 22-8
module differences 22-11
policer 22-8
queue selector 22-9
supported and unsupported features 22-16
verifying configurations 22-15, 22-22
ip route command
map lists
13-8
static IP routes 26-2
ip ssh version command 4-20
ip unnumbered command
tag switching on ATM interfaces
16-4
tag switching on VP tunnels 16-10
IPX routing MPLS (note) 16-32