Filter
Top Products
xxxiii
ATM Switch Router Software Configuration Guide
OL-7396-01
Related Documentation
Related Documentation
This document provides detailed ATM software configuration examples; however, it does not provide
complete ATM software command syntax descriptions or extensive background information on ATM
features. For detailed ATM software command syntax information, refer to the ATM Switch Router
Command Reference publication. For detailed background information on ATM features and
functionality, refer to the Guide to ATM Technology.
You will also find useful information on the command-line interface (CLI) and basic ATM switch router
management in the Configuration Fundamentals Configuration Guide and Configuration Fundamentals
Command Reference publications.
The ATM switch router documentation set is primarily ATM-specific. You might be referred to the Cisco
IOS documentation set for information about IP and router configuration and other non-ATM related
features. For example, when configuring the IP address on the ATM switch processor, only basic
configuration steps are provided. If you need additional overview or detailed IP configuration
information, refer to the Cisco IOS documentation set.
Chapter 18 Configuring Interfaces Describes the steps required to configure the
individual port adapter and interface module.
Chapter 19 Configuring Circuit Emulation
Services
Describes the steps to configure the Circuit
Emulation Services port adapter modules.
Chapter 20 Configuring Frame Relay to
ATM Interworking Port Adapter
Interfaces
Describes the steps to configure the Frame Relay to
ATM interworking port adapter modules.
Chapter 21 Configuring IMA Port Adapter
Interfaces
Describes the steps to configure inverse multiplexing
over ATM port adapter interfaces.
Chapter 22 Configuring Quality of Service Describes the quality of service (QoS) features built
into your switch router and includes information on
how to configure the QoS functionality.
Chapter 23 Configuring the ATM
Traffic-Shaping Carrier Module
Describes the features and configuration procedures
for the ATM traffic-shaping carrier module
(TSCAM).
Chapter 24 Configuring Rate Limiting and
Traffic Shaping
Describes rate limiting features and configuration
procedures for your switch router.
Chapter 25 Configuring ATM Router
Module Interfaces
Describes the steps to integrate Layer 3 routing and
ATM switching with the ATM router module.
Chapter 26 Managing Configuration Files,
System Images, and Functional
Images
Includes procedures for updating and maintaining
the ATM switch router software and configurations.
Appendix A PNNI Migration Examples Provides examples for migrating from a flat PNNI
topology to a hierarchical topology.
Appendix B Acronyms Lists the acronyms used in this guide.
Chapter Title Description