Filter
Top Products
102
C
HAPTER
5: C
ONFIGURING
THE
P
LATFORM
Configuration Flash
Status
Show status of the configuration flash. When you change the
configuration of the CoreBuilder 9000 ATM Enterprise Switch, the new
configuration is stored in the configuration flash. This command indicates
when the new configuration has been successfully stored.
Before you power cycle (turn off and on) the Switch, make sure that the
configuration flash has been updated.
Command Actions
Command Result
Example
Enter:
1 6
The following message is displayed:
Configuration flash is up-to-date.
Enter the menu sequence:
(1) SYS: Platform Configuration
(6) FLS: Configuration Flash Status
Direct access sequence:
1 6
System action taken:
Displays configuration flash status
System message display:
Configuration flash is up-to-date.