Filter
Top Products
334
C
HAPTER
11: C
ONFIGURING
AND
M
ANAGING
PNNI
Set & Save Enhanced
E.164 Address
Support State
Updates the status of the enhanced E.164 address support state to
ENABLED or DISABLED and saves it in flash memory. A change to the
status takes place after the next reboot. See “ATM Address Format” on
page 196 in the Operations Guide for more information on E.164.
Command Actions
Command Result
Example
Enter:
1 1 9 4 2 2 1
The following message is displayed:
Enhanced E.164 Address Support is ENABLED.
The status of the enhanced E.164 address support is set to ENABLED and
is saved in flash memory.
Enter menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch setup
(9) PNI: PNNI Setup
(4) CFP: Configure PNNI
(2) EEA: Enhanced E164 Address
Support
(2) SET: Set & Save Enhanced
E.164 Addr Support State
Enter a parameter at the prompt
Parameter Format or Range
E.164 address support
state
0
to disable enhanced E.164 address support
1
to enable enhanced E.164 address support
Direct access sequence:
1 1 9 4 2 2
[parameters]
System action taken:
The status of the enhanced E.164 address support
state is updated to ENABLED or DISABLED.
System message display:
Enhanced E.164 Address Support is
DISABLED/ENABLED.