Filter
Top Products
158
C
HAPTER
7: C
ONFIGURING
V
IRTUAL
C
HANNELS
Example
Enter:
3 4 1 4 9 5.1.4 0 55 0
The following message is displayed:
A new output VC was created with call number: 9
out connection number: 25
Release PVC
Release a specified PVC. PVCs must be manually released. When a P2M
PVC is released, all additional destination connections are also released.
You cannot release SVCs with this menu.
In a P2M (point-to-multi-point call), this option releases all of its branches
that belong to the call number that you enter.
Command Actions
Command Result
Example
Enter:
3 4 1 5 10
The following message is displayed:
A PVC with call number 10 was released.
Enter the menu sequence:
(3) CON: Connections
(4) S&C: Setup of Connections and ATM
Addresses
(1) PVC: PVCs Setup
(5) REP: Release PVC call
Enter a parameter at the prompt
Parameter Format or Range
Call number Integer. See“Display Call Routed to ATM Address” on
page 140
to get a call number for a port.
Direct access sequence:
3 4 1 5
[parameters]
System action taken:
The PVC with the specified call number is released.
System message display:
A PVC with call number <n> was
released.