Filter
Top Products
LAN Emulation Redundancy
279
Redundant LES General Parameters
Table 38 describes the redundant LES general parameters.
Table 38 Redundant LES General Parameters
Parameter Description
LES ATM Address The LES ATM address.
The LES connection state. This can be:
Connection State
Establish There is a connection between the
LECS and the LES.
Being Established A connection is being established
between the LECS and the LES.
No Connection There is no connection between the
LECS and the LES.
LES Location The location of the LES. This can be: Internal or External.
Internal The LES is on the same switch as the
LECS.
External The LES is not on the same switch as
the LECS.
Local LES Instance The Id of the LES on an Internal switch (this is not relevant
for an External switch location).
Number of Active
Clients
The number of current active clients (as reported by the
LES).
Time since Last Active
Msg
The time elapsed since the LES stopped being active (in
minutes).
Number of RESET
messages sent to LES
The number of Reset messages sent to the LES by the LECS.
A Reset is attempted to solve split situations
Number of RESET
messages rcvd to LES
The number of Reset messages actually received by the LES
from the LECS (see above).
Reset LES Allowed The number of Resets to the LES that are allowed (relevant
only for a shared LES).
Number of ELANs
attached to LES
The number of ELANs that are attached to the LES.