Filter
Top Products
LECS Address
245
Update Resident LECS
Address
Update the address of the resident LECS. Enter the user part of the
address (last 7 hex bytes). The switch network prefix is used for the first
13 bytes. The update takes place immediately.
Command Actions
Command Result
Example
Enter:
2 1 2 0.a0.3e.0.0.1.0
The following message is displayed:
FLASH action completed successfully.
The resident LECS address is updated.
Enter menu sequence:
(2) LEM: LAN Emulation
(1) LCS: LE Config Service
(2) LSP: Set resident LECS addr
Enter a parameter at the prompt
Parameter Format or Range
User part of LECS
address
7 Hex bytes separated with dots
Direct access sequence:
2 1 2
[parameter]
System action taken:
The address of the resident LECS is updated. The
update takes place immediately.
System message display:
FLASH action completed successfully.