Setting Up for Management
63
Update IP Subnet
Mask
Update the IP subnet mask of the CoreBuilder 9000 ATM Enterprise
Switch. The default factory IP subnet mask address is
255.255.255.0
.
Command Actions
Command Result
Example
Enter:
1 1 2 4 2 255.255.0.0
The following message is displayed:
Subnet Mask address was successfully set for the next reboot.
The IP subnet mask is updated to 255.255.0.0, and takes effect after the
next reboot.
Enter the menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch Setup
(2) MNG: Management Setup
(4) MSK: Subnet Mask Setup
(2) SSM: Set Subnet Mask
Enter a parameter at the prompt
Parameter Format or Range
Subnet mask address Valid subnet mask
Direct access sequence:
1 1 2 4 2
[parameters]
System action taken:
The subnet mask address is updated.
System message display:
Subnet Mask address was successfully
set for the next reboot.