Filter
Top Products
Setting Up for Management
59
Update NMS Address
Update the NMS IP address where the CoreBuilder 9000 ATM Enterprise
Switch sends the event traps. The factory default NMS address is
255.255.255.255
.
The NMS IP address is changed after the next reboot
Command Actions
Command Result
Example
Enter:
1 1 2 2 2 100.1.0.131
The following message is displayed:
NMS address was successfully set for the next reboot.
The NMS address is updated to 100.1.0.131.
Enter the menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch Setup
(2) MNG: Management Setup
(2) NMS: NMS Setup
(2) SNS: Set NMS Address
Enter a parameter at the prompt
Parameter Format or Range
NMS address Valid IP address
Direct access sequence:
1 1 2 2 2
[parameters]
System action taken:
The NMS address is updated.
System message display:
NMS address was successfully set for
the next reboot.