Filter
Top Products
182
C
HAPTER
7: C
ONFIGURING
V
IRTUAL
C
HANNELS
Update Protocol
Timer Resolution
Update the timer resolution of the CoreBuilder 9000 ATM Enterprise
Switch. The default timer resolution is 500 msec (0.5 secs); the minimum
timer resolution is 100 msec and there is no upper limit. For more
information, see the previous section and see “Timer Resolution” on
page 98 in the Operations Guide.
This command causes the new timer resolution to be activated in the
current session. The new value is stored in flash.
Command Actions
Command Result
Example
Enter:
1 1 4 1 2 250
The following message appears:
Timer resolution was successfully set.
The timer resolution is updated to 250 msec and saved to flash.
Enter the menu sequence:
(1) SYS: Platform configuration
(1) SET: Switch setup
(4) SIG: Signaling setup
(1) RES: Timer Resolution setup
(2) SET: Set Timer Resolution
Enter a parameter at the prompt
Parameter Format or Range
Timer Resolution in millisec; Range: >=100
Direct access sequence:
1 1 4 1 2
[parameters]
System action taken:
The timer resolution is updated.
System message display:
Timer resolution was successfully set.