Filter
Top Products
262
C
HAPTER
9: M
ANAGING
LAN E
MULATION
Configure Segment
ID
Configure a local segment ID for a token ring ELAN in the LECS database.
Specify the ELAN name.
Each token ring segment in a token ring network that uses source routing
must be assigned a unique segment ID by the network administrator. You
assign the segment ID to the ATM ELAN, which simulates the token ring,
by this command. Then, when a LEC joins the ELAN, it gets the segment
ID from the LECS. Alternatively, instead of using this command, you can
configure the segment ID manually in each individual LEC in the ELAN.
You cannot assign a segment ID to a non-token ring ELAN.
Command Actions
Command Result
Example
Enter:
2 1 5 8 elan_73_9 133
The following message is displayed:
Segment id has been updated.
The segment ID is added to the LECS database.
Enter menu sequence:
(2) LEM: LAN Emulation
(1) LCS: LE Configuration Service
(5) LNT: LECS Network topology
(8) SEG: Edit segment id (C23, for
TR only)
Enter a parameter at the prompt
Parameter Format or Range
ELAN name Up to 32 characters. For more information, see “Add
ELAN” on page 259.
Segment ID
1
-
4096
(12 bit number)
Direct access sequence:
2 1 5 8
[parameters]
System action taken:
The segment ID is added to the LECS database.
System message display:
Segment id has been updated.